top of page
Itokii PRO Wireless Open/Closed Sensor - commercial AA battery powered.

Itokii PRO Wireless Open/Closed Sensor - commercial AA battery powered.


The Itokii PRO Wireless Open-Closed Sensor uses an external magnetic switch to detect the presence or removal of a trigger magnet. When the detection state of the sensor changes, wireless communication is immediately sent to the gateway.


The communications can be configured to be sent urgently or as an awareness notification when: - Magnet is absent - Magnet is present - Magnet is present or absent If the communication is not marked urgent, the data will be stored and scheduled to be forwarded by the gateway later. If the communication is marked urgent, the gateway will immediately attempt to securely send the message to Web Portal, or other approved data services.


Key Features - Detects when a door or window is accessed - Uses magnetic detection switch - Operation gap up to 19mm (0.75 in.) - Cable length: 381 mm (15 ") - Cable terminations: Magnetic switch

    • PRO - Leading Enterprise Grade "Internet of Things" Solutions

      PRO sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows PRO sensors to have better interference immunity from other wireless devices.

      Superior power management provides PRO sensors with almost twice the battery life of Itokii’s standard wireless sensors.

    • Coin cell sensors typically last 3+ years.
    • AA and Industrial sensors typically last up to 10+ years.
    • PRO products employ  new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.


      Integrated on-board data storage allows PRO sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

      Over-the-air updates allow PRO products to be updated remotely if new fixes or features become available.

      Itokii PRO Industrial Sensors come in an IP65, NEMA 4X, CE rated, sealed, and weatherproof enclosure. They are powered by a single, replaceable, Industrial grade 3.6 V battery (included).

      An optional solar powered version is also available. The solar powered version includes a Lithium Iron Phosphate rechargeable battery in conjunction with a solar power cell to keep the battery charged and at optimal capacity. If there is no light present at the solar cell, the battery alone could continue to power the sensor for up to 8-10 years.



    bottom of page