Itokii PRO WIRELESS 0-20 MA CURRENT METER - COIN CELL POWERED

SKU: ITS2-9-W1-MA-020-L01

Itokii wireless 0-20mA current meters are capable of measuring the current off another device or sensor, up to 20mA (DC), by connecting the leads of the sensor to the positive and ground terminals of the device being measured. Examples of interfacing devices include, but are not limited to: Current transducers (CTs) with outputs up to 20 mA, pH sensor, dissolved oxygen sensor, pressure sensor, magnetic flow meters, velocity or acceleration sensors, industrial vibration sensors, industrial accelerometers, any kind of sensor that specifies the output is in (mA) within the range of 0 – 20.

 

Product Features

Interfaces with sensors between 0-20 mA.

 

Notes:  WARNING: Use caution when interfacing to the Itokii 0-20mA Current meter. Negative voltages, any kind of AC Voltages, or DC Voltage exceeding 3.6V WILL DAMAGE the electronics of the wireless sensor. Itokii is not responsible for troubleshooting, replacing or reimbursing damages incurred by disregarding this warning.

    • PRO - Leading Enterprise Grade "Internet of Things" Solutions

      PRO sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows PRO sensors to have better interference immunity from other wireless devices.

      Superior power management provides PRO sensors with almost twice the battery life of Itokii’s standard wireless sensors.

    • Coin cell sensors typically last 3+ years.
    • AA and Industrial sensors typically last up to 10+ years.
    • If ordering NIST certified temperature sensors orders may take up to 6 weeks to ship.

      PRO products employ  new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

       

      Integrated on-board data storage allows PRO sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

      Over-the-air updates allow PRO products to be updated remotely if new fixes or features become available.

      Itokii PRO Industrial Sensors come in an IP65, NEMA 4X, CE rated, sealed, and weatherproof enclosure. They are powered by a single, replaceable, Industrial grade 3.6 V battery (included).

      An optional solar powered version is also available. The solar powered version includes a Lithium Iron Phosphate rechargeable battery in conjunction with a solar power cell to keep the battery charged and at optimal capacity. If there is no light present at the solar cell, the battery alone could continue to power the sensor for up to 8-10 years.

       

      Notes: 

    • YouTube
    • LinkedIn

    Copyright Inicius LLC. All rights reserved. © 2020, Itokii.